CeXS on the road - Trollhättan
Time: Wed 2023-03-08 09.00 - 15.00
Location: Room Staffan PTC, Högskolan Väst, Trollhätten
Language: English
Participating: HV, CeXS, Chalmers, GKN, KTH, Uni de Lorraine, LTU
CeXS and Högskolan Väst are jointly holding a seminar "Using high-energy X-rays and Neutrons for research and innovation on additive manufacturing.
After an introduction to x-ray and neutron facilities and measurement techniques, researchers from industry and academia will present case studies of electron beam, laser beam and general AM research that used x-ray/neutron experiments.
Before 22 February, register here .
The programme is as follows.
Start time | Speaker | Title |
---|---|---|
09.00 |
Magnus Neikter, HV |
Welcome and introduction |
Facilities |
||
09.10 |
Gabriel Spartacus, KTH |
Introduction to materials characterisation at large scale X-rays and neutrons research facilities |
09.35 |
Denise McCluskey, KTH |
Overview of the Center for X-rays in Swedish Materials Science and the PETRA III Swedish Materials Science beamline – a Swedish facility in Germany |
10.00 |
Fika |
|
Cases |
||
10.30 |
Robert Pederson, HV |
AM/welding-based activities at HV |
10.50 |
Lars Nyborg, Chalmers Eduard Hryha, Chalmers |
Application of using Synchrotron X-rays facilities in materials and process development for metal additive manufacturing |
11.10 |
Jörg Volpp, LTU |
Laser-AM activities at LTU and X-rays analysis |
11.30 |
Greta Lindwall, KTH |
In-situ high-energy X-rays studies on powder bed fusion |
11.50 |
Lunch |
|
13.00 |
Jesper Liljemark Mattsson, GKN |
Application driven Additive Manufacturing supported by Process Simulation |
13.20 |
Karthikeyan Thalavai Pandian, HV |
Load partition of E-PBF built Ti-6Al-4V using neutron diffraction |
13.40 |
Imad-E. Benrabah, Univ. de Lorraine |
High-throughput mapping of phase transformation in compositionally graded materials |
14:00 |
Discussions |
|
14:30 |
Optional lab tour |